|
Poli Glow
Fiberglass Restoration System
 |
-
PoliGlow
is a New Concept in boat
polish
- PoliGlow is NOT a Wax
- PoliGlow is a clear-coat with a Gloss Level More Than 5
Times that of any Wax
- Highest Initial Gloss of All Do-it-yourself Products
Tested
- Won Highest Gloss After 12 and 21 Months
- #1 Rated By Publication "Practical Sailor"
- #1 Rated By "Power Boat Reports"
- PoliGlow will NOT wash off with regular boat soap
(not even with compounds)
- Easy to apply-Wipe on, No rubbing or Buffing
- Lasts for over 12 months
- Can Be Used on Boats, RV's, Travel Trailers,
Trailers, any Fiberglass Surface!
|
|
Results Speak for
Themselves... |
 |
 |
 |
|
 |
 |
 |
|
|
|
See It In Action...
|
|
Never wax your boat again!
Does your boat shine when wet only to fade
again once the water dries?
Traditionally, boat waxes, cleaners, and compounds have been used to
restore aged gelcoat. The problem is they wash away and don't last
very long. Just ask anyone who has spent hours of breaking
their back waxing only to have the surface return to it's aged look
within a few months, weeks or days time.
As fiberglass ages, UV rays from the sun change the
gelcoat finish - the surface becomes microscopically pitted so that
light, instead of being reflected in one direction becomes
scattered, reflecting back in random directions, creating a dull and
faded appearance. The PoliGlow process first clears the
microscopic voids of the collection of accumulated compounds, waxes,
oxidation and grime; then the PoliGlow fills those voids and
produces a "like wet" surface reflection superior to any wax
available!
PoliGlow is not a
wax, it is a UV protective clear coat that has been independently
proven to have a shine 5 times that of the best waxes on the
market. Not only that, but it also maintains that shine for up to a
year and more.
Say goodbye to
buffing, PoliGlow is a different animal.
|
Don't take our word for it...
Rated the Best
By...
Practical Sailor
&
Powerboat Reports
Consumer Resource Publications for
the U.S. Marine Industry
What
did they conclude?
- Highest Initial Gloss of All the "Do It Yourself" Products
Tested
- Ease of Removal "Excellent"
- POLI GLOW is one of our favorites
- Recommending Poli Glow is a no-brainer
It all
started in 1997 when PoliGlow achieved the highest gloss of any
DIY (Do-It-Yourself) Hull Restorer.
Then top Honors In 1999:
"Fiberglass Hull
Restorers: 21 Month Report"
Again In 2004:
"Our tester puts
Poli Glow at the head of the pack."
Most Recently in 2007:
"Recommending
Poli Glow is a no-brainer."
|
"...I have a
better-than-new looking boat."
I have a 22' flats boat that's
five years old and was polluted with oxidation. After applying
6 coats of Poli Glow I have a better-than-new looking boat.
The surface is glossy and has
restored the original deep rich color. I had to see it to
believe it!
John Bryant - Florida
|
|
|
Applying POLIGLOW
The surface does not need to
be shiny for the application of
PoliGlow, just clean and uniform in color.
PoliPrep should be used to
assure that the surface is clean, free of oxidation, wax and
rubbing compounds, mildew, oil, or grease.
Preparation of surface
is the most important step!
These very important steps
should not be omitted. The final results will be based on this
initial preparation. Clean surface thoroughly making sure it is
free of stains, oxidation, dirt and previously applied wax,
polish or rubbing compound. These products will interfere with
the application of PoliGlow.
If applying to dark
colors or metal-flake finishes, use
PoliOx to remove
the burnt-hazed layer before using the PoliGlow system.
PoliPrep will remove surface oxidation, old wax,
rubbing compounds, stains mildew, oil and grease. Wet the
surface, then apply PoliPrep
with a sprayer (always wear gloves). Scrub with supplied scrub
pad until the surface feels smooth and is free of stains and
oxidation. For severe oxidation, you can use a more abrasive
scrub pad. Rinse the area with clear water and allow to dry
thoroughly. You are now ready to apply
PoliGlow. |
|
|
|
|
|
Applying Poli Glow
For best results, apply to dry surface using our 7"
applicator. For smaller, hard to reach areas, use our
smaller applicator, which is included. Do not allow
applicator to dry. Keep applicator soft by rinsing with
clean water occasionally. Apply in thin, even, slightly
overlapping strokes. Do not go over coats until dry. To
keep surface clean, avoid windy conditions and apply in
temperatures between 55 to 95 degrees F.
PoliGlow can be applied
in direct sunlight on light colors only. For easier
application, apply in overlapping 5' square sections
allowing each coat to dry (Approx.60 seconds). The first
several coats may appear streaky due to the absorption
of PoliGlow into the
surface. A minimum of 5-6 coats will make the surface
shine like new. Avoid contact with rain for several
hours. Allow surface to cure for 24 hours before coming
in contact with water.
Maintenance
PoliGlow is a unique
product. It will not wash off or be affected by soap and
water. A mild soap will keep your surface shining and
clean. To maintain a PoliGlow
shine, reapply one or two coats every 6-8 months. Avoid
contact with ammonia-based products, degreasers, teak or
hull cleaners and abrasive cleaning products.
PoliStrip will easily
remove PoliGlow. Spray on small area, let stand 1-2 minutes (do not allow
to dry), scrub with the scrub pad. Rinse area with clean
water.
|
"PoliGlow is the
single best and most worthwhile investment I have made in this
boat in twelve years of ownership."
I own a 1977 yellow-hulled
Pearson 30 Sailboat. Two years ago, the color was dull, faded,
and very ugly. I tried everything short of painting; which
now I'm really glad I didn't do.
I used PoliGlow and it looked
like a new boat!
Now, two years later it still
looks very good, but perhaps not quite as good as it did, so I
am doing a refresh on it. This year I am also doing the
areas of the deck and cockpit which are white and faded.
PoliGlow is the single best and most worthwhile investment I
have made in this boat in twelve years of ownership!
This product will surely change the market on old boats to
reflect their actual value rather than the low prices they
receive because of their cosmetic appearance.
I bet manufacturers of new
boats hate this product!
Mike Jorgensen - Michigan
|
|
|
Guarantee
If you are not totally satisfied with
PoliGlow, simply return
the unused
portion along with a copy of your receipt, within 12 months
from the time of purchase for a full refund.
P.S. -
Bonus Just
Announced
To ensure you have the best possible
results with the PoliGlow Restoration System, we're going to give
you our newly released publication: MyBoatStore's
"Skipper's Trick-of-the-Trade Guide to
PoliGlow" absolutely FREE
with purchase of the Complete Poli Glow kit.
This guide is the most comprehensive
overview available for the Poli Glow system and is offered only to
MyBoatStore customers. This $19.95
value can be yours if you order today!
* This is a Limited Time offer.
Act Now! |
| |
 |
|
Copyright MyBoatStore.com - All Rights Reserved 2009 -
Legal Stuff
|
|
|
|
|
